Key Features
- Frequency Range LF - 22 GHz
- Insertion Loss 1.7 dB
- Input IP3 35 dBm
- Input P1dB 23 dBm
- Supply Single
Applications
- Wideband Receivers
- Telecommunication
- Test and Measurement
- SATCOM
- SDR
Architecture
ATEK271 Block Diagram
ATEK271 is a wideband absorptive SP4T switch with low loss and high isolation. Frequency of operation starts from low frequencies close to DC, goes up to 22 GHz. RF input outputs are matched to 50 ohms internally. Evaluation Board and bare die options are available upon request.
Technical Specifications
| Parameter | Condition | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Frequency Range | LF | 22 | GHz | ||
| Insertion Loss | 4 GHz | 1 | dB | ||
| 8 GHz | 1.4 | dB | |||
| 12 GHz | 1.8 | dB | |||
| 16 GHz | 2 | dB | |||
| 20 GHz | 2.2 | dB | |||
| 22 GHz | 2.6 | dB | |||
| Isolation | 4 GHz | 48 | dB | ||
| 8 GHz | 49 | dB | |||
| 12 GHz | 35 | dB | |||
| 16 GHz | 34 | dB | |||
| 20 GHz | 44 | dB | |||
| 22 GHz | 50 | dB | |||
| Input Return Loss | -16 | dB | |||
| Output Return Loss | -20 | dB | |||
| Input IP3 | 35 | dBm | |||
| Input P1dB | 23 | dBm | |||
| Switching Time | On | 130 | ns | ||
| Off | 20 | ns | |||
| DC Supply Voltage | -5 | V | |||
| DC Supply Current | 3 | mA | |||
| Control Current | 0.5 | mA | |||
| Control Level | Low | 0 | V | ||
| High | -5 | V | |||
| Operating Temperature | -40 | 85 | °C |
Available Resources
Ready to Integrate ATEK271?
Contact our engineering team for technical support, samples, or volume pricing.
Request More Information