Key Features
- Frequency Range 2 - 22 GHz
- Gain 20 dB
- Noise Figure 3 dB
- Supply Positive
- compact size3x3 mm
Applications
- Wideband Receivers
- Telecommunication
- Test and Measurement
- SATCOM
- SDR
Architecture
ATEK162AN3 Block Diagram
ATEK162AN3 is a wideband low noise amplifier covering 2 to 22 GHz frequency range. ATEK162AN3 provides flat gain and low noise over wideband with single supply voltage. This allows users to easily realize wideband receiver frontends. Amplifier housed in compact 3x3 mm low cost SMD package. RF input and output matched to 50 ohms internally. Evaluation Board, bare die, custom package, and module options are available upon request.
Technical Specifications
| Parameter | Condition | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Frequency Range | 2 | 22 | GHz | ||
| Gain | 2 GHz | 20 | dB | ||
| 8 GHz | 21 | dB | |||
| 16 GHz | 19 | dB | |||
| 22 GHz | 17.6 | dB | |||
| Noise Figure | 2 GHz | 3.5 | dB | ||
| 8 GHz | 3 | dB | |||
| 16 GHz | 2.9 | dB | |||
| 22 GHz | 2.9 | dB | |||
| Isolation | 2 GHz | 33 | dB | ||
| 8 GHz | 36 | dB | |||
| 16 GHz | 33 | dB | |||
| 22 GHz | 39 | dB | |||
| Input Return Loss | -12 | dB | |||
| Output Return Loss | -11 | dB | |||
| Output IP3 | 28 | dBm | |||
| Output P1dB | 18 | dBm | |||
| Psat | TBD | dBm | |||
| DC Supply Voltage | 5 | V | |||
| DC Supply Current | 76 | mA | |||
| Operating Temperature | -40 | 85 | °C |
Available Resources
Ready to Integrate ATEK162AN3?
Contact our engineering team for technical support, samples, or volume pricing.
Request More Information