Key Features
- Frequency Range0.01 - 3 GHz
- Gain 20 dB
- Noise Figure 0.8 dB
- P1dB 20 dBm
- Supply Single
- compact size3x3 mm
Applications
- Spectrum Analysis
- Wideband receivers
- Telecommunication
- Test Equipment
- SDR
Architecture
ATEK151P3 Block Diagram
ATEK151P3 is a wideband low noise amplifier covering 0.01 to 3 GHz frequency range. Amplifier operational low frequency range can be extended to lower frequencies by increasing external component values. ATEK151P3 provides flat gain and sub-1dB noise figure over wide bandwidth without the need for external matching components. This allows users to easily realize wideband receiver frontends. Amplifier housed in compact 3x3 mm low cost SMD package, input and output matched to 50 ohms internally. Evaluation Board, bare die, custom package, and module options are available upon request.
Technical Specifications
| Parameter | Condition | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Frequency Range | 0.01 | 3 | GHz | ||
| Gain | 10 MHz | 20 | dB | ||
| 0.5 GHz | 20.8 | dB | |||
| 1 GHz | 20.7 | dB | |||
| 2 GHz | 20.1 | dB | |||
| 3 GHz | 19.3 | dB | |||
| Noise Figure | 0.01 GHz | 0.9 | dB | ||
| 0.5 GHz | 0.6 | dB | |||
| 1 GHz | 0.7 | dB | |||
| 2 GHz | 1 | dB | |||
| 3 GHz | 1.1 | dB | |||
| Input Return Loss | 9 | dB | |||
| Output Return Loss | 10 | dB | |||
| Output P1dB | 20 | dBm | |||
| Output IP3 | 32 | dBm | |||
| DC Supply Voltage | 5 | V | |||
| DC Supply Current | 60 | mA | |||
| Operating Temperature | -40 | 85 | °C |
Available Resources
Ready to Integrate ATEK151P3?
Contact our engineering team for technical support, samples, or volume pricing.
Request More Information