Key Features
- Frequency Range 1 - 7.5 GHz
- Insertion Loss 11 dB
- Supply Positive
- compact size5x5 mm
Applications
- Wideband Receivers
- Telecommunication
- Test and Measurement
- SATCOM
- SDR
Architecture
ATEK884P5 Block Diagram
ATEK884P5 is a tunable band pass filter with low in band loss and high rejection. Filter is controlled by 10-bit GPIO control interface. 2 filter covering from 1 to 7.5 GHz frequency band, and additional 2 bypass states. Filter is developed in highly repeatable MMIC manufacturing process, which results in minimal part to part variation. Bias and control voltages of the filters are positive, which eliminates the need for negative voltage rails. Filter is housed in compact 5x5 mm low cost SMD package. Input and output are matched to 50 ohms internally. Evaluation Board, bare die, custom package, and module options are available upon request.
Technical Specifications
| Parameter | Condition | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Frequency Range | 1 - 7,5 | GHz | |||
| Insertion Loss | 1-3 GHz | 11 | dB | ||
| 3-7.5 GHz | 9 | dB | |||
| Input Return Loss | -12 | dB | |||
| Output Return Loss | -12 | dB | |||
| Input IP3 | TBD | dBm | |||
| Input P1dB | TBD | dBm | |||
| Switching Speed | On | 260 | ns | ||
| Off | 210 | ns | |||
| Settling Time | 500 | ns | |||
| DC Supply Voltage | 3 | 5 | 5.5 | V | |
| DC Supply Current | 7 | mA | |||
| Control Current | 3 | mA | |||
| Control Level | Low | -0.1 | 0.5 | V | |
| High | 3 | 5.5 | V | ||
| Operating Temperature | -40 | 85 | °C |
Available Resources
Ready to Integrate ATEK884P5?
Contact our engineering team for technical support, samples, or volume pricing.
Request More Information